Comparison Of Flexural Strength Of Wulung Bamboo Reinforced Concrete Beam As A Substitute For Iron Reinforced
Keywords:
Strong flexible, Reinforced bamboo, Reinforcement ironAbstract
Concrete bony is one of the material the most popular construction in the civil world and many used in development infrastructure such as buildings, bridges , roads , even House settlement citizens and others. In a number of decade in the era of welcoming Golden Indonesia 2045, the challenges industry construction concrete bony the more complex , so that demands improvement production concrete bony the more high . With development technology concrete bony so the more many ideas and innovations are used For increase quality concrete boned . One of the its innovation that is with using material replacement that is reinforcement bamboo black hair as replacement reinforcement iron . In the study This writer innovate make bamboo black hair as replacement reinforcement iron . Research This aim For know strong flexible beam reinforcement bamboo black hair as substitute . Research This done with compare beam concrete normal with reinforcement bamboo wulung and reinforcement iron . Research This referring to SNI 03- 2834- 2000 concerning Procedures Making Plan Normal Concrete . Based on results study can be concluded that mark strong press concrete normal Fc ' 25 is 465.9 KN, or 26.36 MPa, strong flexible beam Normal concrete , namely : 27.9 KN or 1.24 MPa, strong flexible concrete reinforcement bamboo namely : 31.4 KN or 1.39 MPa, strong flexible Beam Concrete reinforcement iron namely : 53.85 KN or 2.39 MPa
References
F. R. Ashshiddiq, Y. P. A. Rumbyarso, and B. M. Siagian, “Analysis of flexural strength of beam using bamboo reinforcement,” International Journal of Multi Science, vol. 4, no. 2, pp. 97–103, 2024.
H. Archila, S. Kaminski, D. Trujillo, E. Zea Escamilla, and K. A. Harries, “Bamboo reinforced concrete: A critical review,” Materials and Structures, vol. 51, art. no. 102, 2018, doi: 10.1617/s11527-018-1228-6.
S. Qaiser, A. Hameed, R. Alyousef, F. Aslam, and H. Alabduljabbar, “Flexural strength improvement in bamboo reinforced concrete beams subjected to pure bending,” Journal of Building Engineering, vol. 31, art. no. 101289, 2020, doi: 10.1016/j.jobe.2020.101289.
A. Javadian, I. F. C. Smith, and D. E. Hebel, “Application of sustainable bamboo-based composite reinforcement in structural-concrete beams: Design and evaluation,” Materials, vol. 13, no. 3, art. no. 696, 2020, doi: 10.3390/ma13030696.
A. Javadian, M. Wielopolski, I. F. C. Smith, and D. E. Hebel, “Bond-behavior study of newly developed bamboo-composite reinforcement in concrete,” Construction and Building Materials, vol. 122, pp. 110–117, 2016, doi: 10.1016/j.conbuildmat.2016.06.084.
A. Agarwal, B. Nanda, and D. Maity, “Experimental investigation on chemically treated bamboo reinforced concrete beams and columns,” Construction and Building Materials, vol. 71, pp. 610–617, 2014, doi: 10.1016/j.conbuildmat.2014.09.011.
K. Ghavami, “Bamboo as reinforcement in structural concrete elements,” Cement and Concrete Composites, vol. 27, no. 6, pp. 637–649, 2005, doi: 10.1016/j.cemconcomp.2004.06.002.
K. Ghavami, “Ultimate load behaviour of bamboo-reinforced lightweight concrete beams,” Cement and Concrete Composites, vol. 17, no. 4, pp. 281–288, 1995, doi: 10.1016/0958-9465(95)00018-8.
W. Ibrahim, W. El-Fattah, H. Ali Hassan, A. Ehab, and A. Elkarem, “Flexural behaviour of bamboo concrete beams,” Innovative Infrastructure Solutions, vol. 9, art. no. 371, 2024, doi: 10.1007/s41062-024-01672-6.
O. Karakus-Zambak and O. C. Celik, “Behavior of bamboo reinforced concrete (BRC) beams under monotonic and dynamic loads,” Construction and Building Materials, vol. 458, art. no. 139683, 2025, doi: 10.1016/j.conbuildmat.2024.139683.
Y. P. A. Rumbyarso and G. Pribadi, “Analisis Stabilitas Lereng dengan Metode Bishop pada Proyek Geotechnical Investigation Jalur Transportasi Pelabuhan Batubara Marangkayu Kabupaten Kutai Kartanegara,” Jurnal Kridatama Sains dan Teknologi, vol. 5, no. 2, pp. 562–577, 2023, doi: 10.53863/kst.v5i02.987.
F. A. Achmad and Y. P. A. Rumbyarso, “Analisis Struktur Slab On Pile terhadap Kontrol Lendutan pada Proyek Jalan Tol Kataraja,” Jurnal Pendidikan Tambusai, vol. 7, no. 2, pp. 13457–13467, 2023, doi: 10.31004/jptam.v7i2.8530.
G. Pribadi, Y. P. A. Rumbyarso, and E. M. S. Sakti, “Pelatihan Merancang Gambar Dengan Aplikasi Autocad untuk Pembekalan Siswa SMK dalam Memasuki Dunia Kerja,” Media Abdimas, vol. 3, no. 2, pp. 52–56, 2023, doi: 10.37817/mediaabdimas.v3i2.2766.
Y. P. A. Rumbyarso, N. L. Chusna, and A. Khumaidi, “Dissolved Oxygen Prediction of the Ciliwung River using Artificial Neural Networks, Support Vector Machine, and Streeter-Phelps,” Jurnal Ilmiah Merpati (Menara Penelitian Akademika Teknologi Informasi), vol. 10, no. 3, pp. 180–190, 2022, doi: 10.24843/JIM.2022.v10.i03.p06.
Y. P. A. Rumbyarso and G. Pribadi, “Penyuluhan Tentang Pentingnya Sebuah Kontruksi Bagunan Rumah Yang Baik Serta Tahan Gempa,” Krida Cendekia, vol. 1, no. 8, 2022.
Y. P. A. Rumbyarso, “Perencanaan Struktur Bangunan Atas (Upper Structure) Gedung STIE Bank BPD Jateng Kota Semarang,” TEKNOKRIS, vol. 24, no. 1, pp. 1–7, 2021.
L. Darmiyanti, Y. Prima, and M. A. Aldianto, “Analisis Borepile Menggunakan Metode Meyyerhoff dan Reese Wright,” Jurnal Sipil Krisna, vol. 9, no. 1, pp. 27–38, 2023, doi: 10.61488/sipilkrisna.v9i1.249.
Y. Prima and G. Pribadi, “Penggunaan Program Plaxis Dalam Studi Penelitian Perkuatan Geotextile Pada Kestabilan Lereng Buatan,” Jurnal Sipil Krisna, vol. 9, no. 1, pp. 22–26, 2023, doi: 10.61488/sipilkrisna.v9i1.248.
Y. P. A. Rumbyarso and G. Pribadi, “Analysis of Landslide Handling With Mini Pile Reinforcement Using Plaxis Software on The ‘X’ Toll Road Project,” Jurnal Teknik Industri Terintegrasi (JUTIN), vol. 7, no. 2, pp. 801–810, 2024, doi: 10.31004/jutin.v7i2.27026.
Badan Standardisasi Nasional, “SNI 03-2834-2000: Tata cara pembuatan rencana campuran beton normal,” Jakarta, Indonesia, 2000.
Badan Standardisasi Nasional, “SNI 4431:2011: Cara uji kuat lentur beton normal dengan dua titik pembebanan,” Jakarta, Indonesia, 2011.
Badan Standardisasi Nasional, “SNI 8020:2014: Kegunaan bambu,” Jakarta, Indonesia, 2014.
Badan Standardisasi Nasional, “SNI 1974:2011: Cara uji kuat tekan beton dengan benda uji silinder,” Jakarta, Indonesia, 2011.
Badan Standardisasi Nasional, “SNI 2847:2019: Persyaratan beton struktural untuk bangunan gedung dan penjelasan,” Jakarta, Indonesia, 2019.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Karsono Karsono, Yonas Prima Arga Rumbyarso, Gali Pribadi
This work is licensed under a Creative Commons Attribution 4.0 International License.
