Quality Control Management in Processed Beef  Production in MSMEs (PT XYZ)

Rangga Mahardika; Nadia Aurin  Azmi; Berliana Oktavia; Muhamad Giofadli Nugraha; Yogi Gunawan; Fatul Rahman; Amadea Selma Agnia Elfath; Riska  Novintri

doi:10.60076/ijeam.v2i2.1330

Authors

Rangga Mahardika Institute Pertanian Bogor
Nadia Aurin Azmi Institute Pertanian Bogor
Berliana Oktavia Institute Pertanian Bogor
Muhamad Giofadli Nugraha Institute Pertanian Bogor
Yogi Gunawan Institute Pertanian Bogor
Fatul Rahman Institute Pertanian Bogor
Amadea Selma Agnia Elfath Institute Pertanian Bogor
Riska Novintri Institute Pertanian Bogor

DOI:

https://doi.org/10.60076/ijeam.v2i2.1330

Keywords:

Quality Control, Statistical Process Control, Rendang, Fishbone Diagram, MSMEs

Abstract

This study focuses on the design and implementation of a quality control management system for the production of rendang at PT XYZ, a local SME. The objective of this research is to analyze and design an integrated quality control system using Statistical Process Control (SPC) tools, including P-control charts and Fishbone diagrams. Data collection was carried out through direct observation, interviews with the owner, and documentation of production records from February 2025. The study found that although the production process was within statistical control limits, there were still variations in product quality, especially in taste and aroma, as well as packaging issues. This research emphasizes the importance of a structured quality management system to enhance product consistency and reduce defects. Recommendations for improvement include formalizing standard operating procedures (SOPs), conducting regular worker training, and adopting modern equipment to ensure more uniform production conditions. The findings of this study provide practical insights for SMEs in the food processing industry to improve product quality and operational efficiency, while also contributing to the development of quality management systems in the local food production industry

References

A. Rosak-Szyrocka, A. Borkowski, and M. Jasiulewicz-Kaczmarek, “Quality management and safety of food in HACCP system aspect,” Production Engineering Archives, vol. 26, no. 2, pp. 50–53, 2020, doi: 10.30657/pea.2020.26.11.

M. Michael and S. Widjaja, “Boosting Firm Performance: Insights from the Food & Beverage Sector’s Key Drivers,” Ilomata International Journal of Tax and Accounting, vol. 5, no. 2, pp. 338–352, 2024, doi: 10.61194/ijtc.v5i2.1105.

I. Nugraha, T. N. Arier, and A. Gufron, “Analisis Pengendalian Kualitas Produk Teh Wangi CV. XYZ dengan Metode Total Quality Control (TQC),” Waluyo Jatmiko Proceeding, vol. 16, no. 1, pp. 341–350, 2023, doi: 10.33005/wj.v16i1.42.

A. Kusuma, H. Septiani, N. Lestari, J. William, T. Hasanah, and F. Ekonomi dan Bisnis, “Eksplorasi praktik manajemen kualitas di usaha mikro, kecil, dan menengah (UMKM),” Jurnal Cendekia Ilmiah, vol. 4, no. 2, pp. 70–81, 2025.

Y. B. Pramono et al., “Implementation of statistical quality control (SQC) as a quality damage control for crepes products in the Indonesian food industry,” in IOP Conf. Ser.: Earth Environ. Sci., vol. 1246, no. 1, 2023, doi: 10.1088/1755-1315/1246/1/012048.

F. Rahmawati et al., “Pentingnya standar operasional prosedur (SOP) dalam meningkatkan efisiensi dan konsistensi operasional pada perusahaan manufaktur,” Jurnal Manajemen Bisnis Digital Terkini (JUMBIDTER), vol. 1, no. 3, pp. 92–101, 2024, doi: 10.61132/jumbidter.v1i2.112.

B. Sutrisno, “A Systematic Literature Review of Quality Seven Tools,” Indonesian Journal of Industrial Engineering & Management (IJIEM), vol. 3, no. 1, pp. 72–84, Feb. 2022, doi: 10.22441/ijiem.v3i1.13551.

F. Sulianta, “Diagram fishbone: Alat analisis penyebab masalah untuk pengembangan bisnis kafe dan profesi konsultan,” 2024.

L. Q. Aini and D. Sukanta, “Pengendalian Kualitas Produk Arummanis dengan Peta Kendali P dan Diagram Fishbone di UMKM Arummanis AT,” Industrika: Jurnal Ilmiah Teknik Industri, vol. 8, no. 3, pp. 45–56, 2024, doi: 10.37090/indstrk.v8i3.1414.

S. Fatimah, D. Syafrini, W. Wasino, and R. Zainul, “Rendang Lokan: History, Symbol of Cultural Identity, and Food Adaptation of the Minangkabau Tribe in West Sumatra, Indonesia,” Journal of Ethnic Foods, vol. 8, no. 1, p. 88, 2021, doi: 10.1186/s42779-021-00088-2.

M. A. Adhim, R. Hasan, R. Nurkholis, and A. Ahmad, “Pengendalian mutu tahu dengan checksheet, diagram pareto, dan diagram fishbone pada usaha Tahu Tansa,” Jupiter, vol. 3, no. 3, pp. 93–104, 2025, doi: 10.61132/jupiter.v3i3.861.

N. Anggraeni and N. Izza, “Penerapan statistical quality control dalam pengendalian mutu produksi snack eggroll,” Jurnal Kewirausahaan Inovasi, vol. 1, no. 1, pp. 22–31, 2022, doi: 10.21776/jki.2022.01.1.10.

T. W. Wardana and A. E. Apsari, “Upaya pengendalian kualitas produk tahu pada UMKM Tahu Prapto menggunakan metode six sigma dan re-layout,” Jupiter, vol. 2, no. 2, pp. 305–318, 2024, doi: 10.61132/jupiter.v2i2.209.

A. P. Dhiba and P. Arsiwi, “Penerapan metode statistical process control dalam pengendalian kualitas proses produksi tahu,” Jurnal Teknologi dan Manajemen Industri Terapan, vol. 4, no. 2, pp. 140–149, 2025. doi: 10.55826/jtmit.v4i2.586